![]() |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
Nice writeup by Dogstar:
It was a busy afternoon, I managed to get the passenger door panel off and take some measurements. Italyn, things look good for getting a reasonably shallow 8" mid woofer in there. The stock speaker is a plastic bodied speaker of approximately 6" diameter sitting on a flat mounting pad of 7" diameter. It's depth is 1.5" before hitting the door panel although I am not sure how much room there is behind the speaker inside the door. The tweeter is a compact unit, looks to be about 3/4". There are about 12 plastic pop fasteners on the door panel and the door proved VERY difficult to get off the first time, it's on there well. The mirror/sail panel came off pretty easily, it is held on with 3 pop fasteners of a type I've never seen. They seem to grip the threads of the bolts which hold the mirror on. There is a screw under a trim panel in the door handle area and another screw under the door handle grab cup which has a rubber liner over it. The door panel will lift straight up, but not too far, the lock/handle cables are still attached, screwed down to the door handle. ![]() ![]() ![]() ![]()
|
| Sponsored Links |
|
|
|
#2
|
||||
|
||||
|
Do you have any pictures of the tweeter section of the door? I'm staging and designing the system for our car and it will save me pulling it off myself
![]() thanks -John |
![]() |
| Thread Tools | |
| Display Modes | |
|
|