![]() |
|
|||||||
|
Hey there! It looks like you're enjoying but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members and much more. Register now! Already a member? Login at the top of this page to stop seeing this message. |
|
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
Nice writeup by Dogstar:
It was a busy afternoon, I managed to get the passenger door panel off and take some measurements. Italyn, things look good for getting a reasonably shallow 8" mid woofer in there. The stock speaker is a plastic bodied speaker of approximately 6" diameter sitting on a flat mounting pad of 7" diameter. It's depth is 1.5" before hitting the door panel although I am not sure how much room there is behind the speaker inside the door. The tweeter is a compact unit, looks to be about 3/4". There are about 12 plastic pop fasteners on the door panel and the door proved VERY difficult to get off the first time, it's on there well. The mirror/sail panel came off pretty easily, it is held on with 3 pop fasteners of a type I've never seen. They seem to grip the threads of the bolts which hold the mirror on. There is a screw under a trim panel in the door handle area and another screw under the door handle grab cup which has a rubber liner over it. The door panel will lift straight up, but not too far, the lock/handle cables are still attached, screwed down to the door handle. ![]() ![]() ![]() ![]()
|
| Sponsored Links |
|
|
|
#2
|
||||
|
||||
|
Do you have any pictures of the tweeter section of the door? I'm staging and designing the system for our car and it will save me pulling it off myself
![]() thanks -John |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|